Depending on which version of Windows you are running you may need to click Show available networks.įrom the available networks list, click on one of the default wireless networks (SSID) broadcast by the WAC104, NETGEAR_11N or NETGEAR_11ACĪ password is not required to connect to the default SSID. Right click on Wi-Fi (Wireless Network Connection) and click Connect/Disconnect. Next we'll connect to the default wireless network broadcast by the WAC104.ĥ. While setting up a wired LAN is a bit more costly and time-consuming than a WLAN (Wireless Local Area. The static IP address is configured on your wireless adapter. Select Internet Protocol Version 4 (TCP/IPv4) > click Properties. Right click on Wi-Fi (Wireless Network Connection) and click Properties.ģ. Connecting to either of these wireless network names is required to access the web interface and configure the access point.Ģ.

Typical cable modems use Ethernet to provide the connection to the home. The wireless network names are NETGEAR_11N on the 2.4GHz band and NETGEAR_11AC on the 5GHz band. At home, your Local Area Network (LAN) might connect together devices over a. When the access point is in factory default settings it will broadcast 2 wireless networkswith open security. Your Ethernet adapter is now configured with static IP 192.168.0.210 and the access point web interface is accessible at Ĭonnecting wirelessly to the access point: Enter IP address 192.168.0.210 in the IP address field.Įnter 255.255.255.0 in the subnet mask field. Describe at least three types of servers. A LAN can be part of a larger backbone network connected to other LANs, a host mainframe, or public networks. After running the Hardware Setup steps of the installer, if the radio is still not detected, you can attempt to configure the network interface manually via the Windows Network Connections App or the command prompt. Select Internet Protocol Version 4 (TCP/IPv4) > and click Properties.Ĥ. A local area network is a group of microcomputers or other workstation devices located within a small or confined area and are connected by a common cable. Configure Ethernet Connection Manually on Windows 10 for USRP Radio. Right click on Ethernet (Local Area Connection) and click Properties.ģ. In the search results click View network connections.Ģ. In Windows, click Start and type network connections. Connecting directly to the access point via Ethernet cable:ġ.

This article outlines the steps required to set a static IP address on your Ethernet adapter if using a direct connection between your Windows device and the access point or wireless adapter if connecting wirelessly to the access point.

Accessing your WAC104 for the first time requires connecting your Windows device to the access point and setting a static IP address on your Ethernet or wireless adapter.

Local area connection vs ethernet